Heaters and regulators INTERTEC VARITHERM, DSETHERM, etc.

VARITHERM heaters heat the air in
the casing by convection. The heating system consists of an explosion
-proof electric heater and a microprocessor. At the same time, it is provided as a temperature control in
protective casings and cabinets and limiting the surface temperature of the heater.
Models: CP VARITHERM DPA 50 T6 100, CP VARITHERM DPA 200 T4 80, CP VARITHERM
DPA 300 T3 60, etc.
MEGATHERM heaters heat the air in the casing by convection. The heater has a built-in temperature limiter, which in case of an outsider heating or technical malfunction, disconnects the heater from the mains. Models: CP MEGATHERM DPA 200 T4, CP MEGATHERM DPA 300 T3, CP MEGATHERM DPA 400 T3, etc .
MICROTHERM heaters heat the air in the casing by convection. CP MICROTHERM is used when there is a place for the location of larger heaters, such as MULTITHERM, are limited. Models: CP MICROTHERM DNA 25 T4, CP MICROTHERM DNA 40 T4, CP MICROTHERM DNA 75 T3.
DSETHERM heating units are aluminum conductive heaters. The electric cartridge heats the body of the heater transmitting heat to the device to which it is attached. Explosion-proof heaters are additionally equipped with a grounding terminal. Models: SL DSETHERM DKA, SL DSETHERM DNA, SL DSETHERM DSA.
BLOCKTHERM heating units are installed on valve blocks, measuring devices, regulating fans and heating these devices by thermal conductivity. Models: SL BLOCKTHERM DPA T3, SL BLOCKTHERM DPA T4, SL BLOCKTHERM NPA, etc.
The system of accompanying heating of pipes EASYTRACE/X-TRACE. Features of the system the heating elements are a high temperature resistant cable with a metal shell and a comparative segment sealed with a compound in the regulator housing, connected to a temperature sensor and a temperature limiter on which thermal images are reproduced conditions on an insulated pipe.
MINITHERM heaters are used for heating the interior space kozhukhov. Ribbed heaters transfer heat by heating the air. This heating method it is recommended if there is no flat surface for the heating unit. Models: SL MINITHERM DLA T4 40, SL MINITHERM NLA F60, SL MINITHERM NLA D70 and others .
MULTITHERM heaters heat the air in the casing by convection. If it is possible, we recommend choosing a heater of temperature class T3. Into the heater built-in temperature limiter, which in case of extraneous heating or technical malfunctions disconnect the heater from the mains. Models: CP MULTITHERM DNA 50 T4, CP MULTITHERM DNA 75 T4, CP MULTITHERM DNA 100 T3 , etc .
Nanotherm heating units are installed on valve blocks, measuring instruments, control valves and heat these devices by means of thermal conductivity. This method of frost protection or temperature maintenance is simple, reliable in operation and economical. Models: SL NANOTHERM A 10, SL NANOTHERM A 15, SL NANOTHERM B 10, etc.
Heaters of the E series are used for heating protective casings, protective cabinets and distribution cabinets, unless explosion protection and complete sealing of the compound is required. Models: E 155, E 156, E 158, E 159, E 160, etc.
TAE thermostats are explosion-proof thermostats. Being two - position regulators (on the principle of "on/off") connected to the electric heater, they can adjust the temperature in the protective casings and cabinets to the specified preset value. Models: TAE-15, TAE-10, TAE-20, TAE-30, etc.
TC ATEX AI temperature controllers are used to adjust the temperature in rooms in electrically heated protective casings and protective cabinets for adjusting valves, measuring devices and the like in explosive areas. Models: TC ATEX AI Fii C1, TC ATEX AI Fii J, etc.
Digital temperature controllers regulate the temperature of the devices or the temperature air in protective casings and in protective cabinets. Models: TC ATEX D SMART.
MEGATHERM heaters heat the air in the casing by convection. The heater has a built-in temperature limiter, which in case of an outsider heating or technical malfunction, disconnects the heater from the mains. Models: CP MEGATHERM DPA 200 T4, CP MEGATHERM DPA 300 T3, CP MEGATHERM DPA 400 T3, etc .
MICROTHERM heaters heat the air in the casing by convection. CP MICROTHERM is used when there is a place for the location of larger heaters, such as MULTITHERM, are limited. Models: CP MICROTHERM DNA 25 T4, CP MICROTHERM DNA 40 T4, CP MICROTHERM DNA 75 T3.
DSETHERM heating units are aluminum conductive heaters. The electric cartridge heats the body of the heater transmitting heat to the device to which it is attached. Explosion-proof heaters are additionally equipped with a grounding terminal. Models: SL DSETHERM DKA, SL DSETHERM DNA, SL DSETHERM DSA.
BLOCKTHERM heating units are installed on valve blocks, measuring devices, regulating fans and heating these devices by thermal conductivity. Models: SL BLOCKTHERM DPA T3, SL BLOCKTHERM DPA T4, SL BLOCKTHERM NPA, etc.
- Heating units SL BLOCKTHERM DPA T. Technical data.
- SL BLOCKTHERM heating units. Technical data.
- SMART BLOCKTHERM system. Technical data.
The system of accompanying heating of pipes EASYTRACE/X-TRACE. Features of the system the heating elements are a high temperature resistant cable with a metal shell and a comparative segment sealed with a compound in the regulator housing, connected to a temperature sensor and a temperature limiter on which thermal images are reproduced conditions on an insulated pipe.
MINITHERM heaters are used for heating the interior space kozhukhov. Ribbed heaters transfer heat by heating the air. This heating method it is recommended if there is no flat surface for the heating unit. Models: SL MINITHERM DLA T4 40, SL MINITHERM NLA F60, SL MINITHERM NLA D70 and others .
MULTITHERM heaters heat the air in the casing by convection. If it is possible, we recommend choosing a heater of temperature class T3. Into the heater built-in temperature limiter, which in case of extraneous heating or technical malfunctions disconnect the heater from the mains. Models: CP MULTITHERM DNA 50 T4, CP MULTITHERM DNA 75 T4, CP MULTITHERM DNA 100 T3 , etc .
Nanotherm heating units are installed on valve blocks, measuring instruments, control valves and heat these devices by means of thermal conductivity. This method of frost protection or temperature maintenance is simple, reliable in operation and economical. Models: SL NANOTHERM A 10, SL NANOTHERM A 15, SL NANOTHERM B 10, etc.
Heaters of the E series are used for heating protective casings, protective cabinets and distribution cabinets, unless explosion protection and complete sealing of the compound is required. Models: E 155, E 156, E 158, E 159, E 160, etc.
TAE thermostats are explosion-proof thermostats. Being two - position regulators (on the principle of "on/off") connected to the electric heater, they can adjust the temperature in the protective casings and cabinets to the specified preset value. Models: TAE-15, TAE-10, TAE-20, TAE-30, etc.
TC ATEX AI temperature controllers are used to adjust the temperature in rooms in electrically heated protective casings and protective cabinets for adjusting valves, measuring devices and the like in explosive areas. Models: TC ATEX AI Fii C1, TC ATEX AI Fii J, etc.
Digital temperature controllers regulate the temperature of the devices or the temperature air in protective casings and in protective cabinets. Models: TC ATEX D SMART.
All INTERTEC products
The group "New Technologies" offers for review the products of the plant INTERTEC: protective covers, cabinets, shelters, canopies, canopies, electric heaters, thermoregulators, air conditioning systems
About INTERTEC
The company INTERTEC (Germany) was founded in 1965 and today is one of the world leaders in the production of protective systems for complex measuring instruments at facilities and the prevention of external influences on equipment.
-
quality
The company has developed specialized and patented production technologies to ensure the best performance and durability of products. -
experience
The company has supplied more than half a million protective covers for equipment operated in the harshest conditions in the world-from the Arctic regions to hot deserts. -
LEADERSHIP
Thanks to high-quality design, innovation and continuous product improvement, INTERTEC has become the world's leading manufacturer in this field.
NEW TECHNOLOGIES GROUP
For sales and support please contact
Contact us or your local dealer for more information on certifications, features, reviews, pricing, stock availability and delivery terms for INTERTEC products.
Reply guaranteed within 8 business hours
- (727)345-47-04
- (3955)60-70-56
- (8182)63-90-72
- (8512)99-46-04
- (3852)73-04-60
- (4722)40-23-64
- (4162)22-76-07
- (4832)59-03-52
- (8352)28-53-07
- (351)202-03-61
- (8202)49-02-64
- (3022)38-34-83
- (395)279-98-46
- (4932)77-34-06
- (3412)26-03-58
- (4012)72-03-81
- (4842)92-23-67
- (843)206-01-48
- (3842)65-04-62
- (4212)92-98-04
- (8332)68-02-04
- (4966)23-41-49
- (4942)77-07-48
- (861)203-40-90
- (391)204-63-61
- (3522)50-90-47
- (4712)77-13-04
- (4742)52-20-81
- (3519)55-03-13
- (375)257-127-884
- (495)268-04-70
- (8152)59-64-93
- (8552)20-53-41
- (831)429-08-12
- (3843)20-46-81
- (383)227-86-73
- (3496)41-32-12
- (3812)21-46-40
- (4862)44-53-42
- (3532)37-68-04
- (8412)22-31-16
- (342)205-81-47
- (8142)55-98-37
- (8112)59-10-37
- (863)308-18-15
- (4912)46-61-64
- (812)309-46-40
- (846)206-03-16
- (8342)22-96-24
- (845)249-38-78
- (8692)22-31-93
- (3652)67-13-56
- (4812)29-41-54
- (862)225-72-31
- (8652)20-65-13
- (3462)77-98-35
- (8212)25-95-17
- (4752)50-40-97
- (998)71-205-18-59
- (8482)63-91-07
- (3822)98-41-53
- (4872)33-79-87
- (4822)63-31-35
- (3452)66-21-18
- (347)229-48-12
- (3012)59-97-51
- (8422)24-23-59
- (8672)28-90-48
- (4922)49-43-18
- (423)249-28-31
- (844)278-03-48
- (8172)26-41-59
- (473)204-51-73
- (4112)23-90-97
- (4852)69-52-93
- (343)384-55-89
Send your question now: